参考设计
(17)
PMP8851 Automotive USB Battery Charging Reference Design | TI.com
PMP8851: This USB battery charging reference design is optimized for size in order to fit within an automobile power accessory port. The design features a USB dedicated charging port controller with integrated current limiting power switch and a 42V DC/DC converter. High integration and small package sizing allows a small form factor.
Universal AC Input, 5V@2.1A Dual Port Smart USB Charger
PMP7389: The PMP7389 reference design uses the UCC28610 and UCC24610 in a Quasi Resonant Flyback to generate 5V. Two ports support dual charging of devices at up to 2.1A for USB charging. The TPS2511 USB power switch also offers the data line control to charge many devices.
PMP8363 85VAC-265VAC Input, 5V@2A Eco-Charger Reference Design for Tablets and Smart Phones | TI.com
PMP8363: This reference design uses the UCC28710 in a quasi-resonant flyback to generate an isolated 5V at up to 2A. This design is over 80% efficient while charging a device. In addition, the energy saving features of the UCC28710 allow this design to consume less than 20mW when plugged into an outlet with no device attached to the USB port. The UCC28710 implements primary-side regulation, eliminating the need for an opto-coupler and reducing the size and cost of the design. The populated circuit boards in this design occupy the space of a 1" x 1" x 0.9" cube.
85VAC-265VAC Input, 5V@2A Eco-Charger Reference Design for Tablets and Smart Phones
PMP8363: This reference design uses the UCC28710 in a quasi-resonant flyback to generate an isolated 5V at up to 2A. This design is over 80% efficient while charging a device. In addition, the energy saving features of the UCC28710 allow this design to consume less than 20mW when plugged into an outlet with no device attached to the USB port. The UCC28710 implements primary-side regulation, eliminating the need for an opto-coupler and reducing the size and cost of the design. The populated circuit boards in this design occupy the space of a 1" x 1" x 0.9" cube.
Universal AC Input, 5V@2.1A Smart USB Charger Cube
PMP8286: This reference design uses the UCC28700 in a quasi-resonant flyback to generate an isolated 5V at up to 2.1A. The UCC28700 implements primary-side regulation, eliminating the need for an opto-coupler and reducing the total component count. This results in a compact and cost effective design. The populated circuit boards in this design occupy the space of a 1" by 1" by 1" cube. The TPS2511 USB power switch also offers the data line control to charge most smart phones and tablets. The energy saving features of the UCC28700 allow this design to consume less than 30mW when plugged into the wall with no device attached to the USB port.
85-265VACin, 5V/1.5A AC/DC USB Charger with Auto-Detect based on PSR Flyback with BJT Switch
PMP9594: This reference design provides an isolated 5V/1.5A output from a universal 85-265VAC input with an efficiency greater than 78%. Employing the UCC28722 Primary Side Regulation (PSR) Flyback controller which helps to eliminate the opto-coupler and secondary side regulation components, this design delivers additional cost savings by employing a bipolar power switch. Additionally, the design features the TPS2511 USB Dedicated Charging Port Controller and Current Limiting Power Switch to safely charge most smart phones and tablets. The energy saving features of the UCC28722 allow this design to consume less than 50mW when plugged into the wall with no device attached to the USB port.
PMP8286 Universal AC Input, 5V@2.1A Smart USB Charger Cube | TI.com
PMP8286: This reference design uses the UCC28700 in a quasi-resonant flyback to generate an isolated 5V at up to 2.1A. The UCC28700 implements primary-side regulation, eliminating the need for an opto-coupler and reducing the total component count. This results in a compact and cost effective design. The populated circuit boards in this design occupy the space of a 1" by 1" by 1" cube. The TPS2511 USB power switch also offers the data line control to charge most smart phones and tablets. The energy saving features of the UCC28700 allow this design to consume less than 30mW when plugged into the wall with no device attached to the USB port.
Dual-Port Automotive USB Charger Reference Design
PMP7390: Using the TPS40170 PWM Buck Controller, this power management reference design provides a regulated 5V to power 2 USB ports at 2.1A each (total 4.2A) in a small form-factor. The design has been optimized for a nominal 12V input and accepts 8-60V.
PMP9594 85-265VACin, 5V/1.5A AC/DC USB Charger with Auto-Detect based on PSR Flyback with BJT Switch | TI.com
PMP9594: This reference design provides an isolated 5V/1.5A output from a universal 85-265VAC input with an efficiency greater than 78%. Employing the UCC28722 Primary Side Regulation (PSR) Flyback controller which helps to eliminate the opto-coupler and secondary side regulation components, this design delivers additional cost savings by employing a bipolar power switch. Additionally, the design features the TPS2511 USB Dedicated Charging Port Controller and Current Limiting Power Switch to safely charge most smart phones and tablets. The energy saving features of the UCC28722 allow this design to consume less than 50mW when plugged into the wall with no device attached to the USB port.
iPad® Automotive Charger Reference Design
TIDA-IPAD-AUTOMOTIVE-CHARGER-REFERENCE-DESIGN: The reference design provides customers an extremely small form factor but still compliant to the iPad® charge current requirement of up to 2.1A at 5V. The switching buck, TPS54340, features switching frequency that is up to 2MHz which is above the audio band requirements. Customers can leverage the small form factor of this reference design and can provide USB charging capability at multiple space-constraint locations within the car. ESD protection on USB pins is provided via TPD2E001.
Automotive USB Battery Charging Reference Design
PMP8851: This USB battery charging reference design is optimized for size in order to fit within an automobile power accessory port. The design features a USB dedicated charging port controller with integrated current limiting power switch and a 42V DC/DC converter. High integration and small package sizing allows a small form factor.
