CRCW060351R1FKEA中文资料_PDF数据手册

CRCW060351R1FKEA

加入BOM

Vishay

Fixed Resistor, Metal Glaze/thick Film, 0.1W, 51.1ohm, 75V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603

技术详情

价格 & 库存

详细参数

不含铅

符合

Active

CHIP

Compliant

EAR99

8533.21.00.30

0.69

RATED AC VOLTAGE (V): 75

Rectangular

SURFACE MOUNT

155 °C

-55 °C

0.45 mm

1.55 mm

SMT

0.85 mm

TR, Paper, 7 Inch

0.1 W

70 °C

AEC-Q200

51.1 Ω

FIXED RESISTOR

0603

YES

METAL GLAZE/THICK FILM

WRAPAROUND

75 V

CAD 模型信息

模型信息提供方: Samacsys

Part Symbol
Footprint
3D Model

可下载的格式

Allegro

Altium

Cadence

CADSTAR

Circuit Studio

CR-5000

CR-8000

DesignSpark

DesignSpark PCB PRO

DipTrace

xDX Designer

Eagle

EasyEDA

Easy-PC

eCADSTAR

KiCad

Mentor

OrCAD

PADS

Proteus

Pulsonix

Quadcept

SOLIDWORKS PCB

TARGET 3001!

Zuken

下载 CAD 档案

从 Samacsys 下载 CAD 模型，即表示您同意我们的条款和隐私政策

文档下载

CRCW060351R1FKEA Vishay Dale 也适用于 CRCW251297R6FKEG ,CRCW06033R90FKEA ,CRCW08053M09FKEA 等其余

参考设计

(7)

400VDC Input to 28V/9A Output Compact, High Efficiency CLL Resonant Converter Reference Design

PMP9750: PMP9750 is a CLL resonant converter reference design with 400VDC input and 28V/9A ouput. Unlike LLC series resonant converter, CLL resonant converter used in PMP9750 utilizes its output inductor to minimize the size of the resonant tank. With resonant controller UCC25600 and bridge driver UCC27714, PMP9750 is able to achieve 95.7% peak efficiency.

High Efficiency 350W AC/DC Power Supply Reference Design

PMP11303.1: PMP11303 is high-efficiency AC/DC power supply reference design with universal AC input and 25V/13.5A and 12V/1A outputs. LLC+PFC combo IC UCC29950 is applied for the main power stages with 25V/13.5A output while UCC28730 is applied for the auxiliary power with 12V/1A output. This design has low no load power comsumption (152mW@230VAC) and over 93% peak efficiency. This design also meet 80PLUS Gold requirement for 115VAC Internal power supplies.

High Efficiency Primary-Side Regulation Flyback with 23-56Vin to 5Vout/0.6A Reference Design

PMP9009: PMP9009 has been designed as a competitive open-frame alternative for the communications market with 23-56Vin to 5Vout/0.6A. PMP9009 has a basic insulation system from input to output making it suitable for a wide variety of applications. UCC28700 is used as the controller for primary-side regulation Flyback converter. PMP9009 has a 81% converter efficiency.

High Efficiency 350W AC/DC Power Supply Reference Design

PMP11303.2: PMP11303 is high-efficiency AC/DC power supply reference design with universal AC input and 25V/13.5A and 12V/1A outputs. LLC+PFC combo IC UCC29950 is applied for the main power stages with 25V/13.5A output while UCC28730 is applied for the auxiliary power with 12V/1A output. This design has low no load power comsumption (152mW@230VAC) and over 93% peak efficiency. This design also meet 80PLUS Gold requirement for 115VAC Internal power supplies.

Universal Input 45W AC-DC LED Driver Reference Design

PMP6011: This design provides the ability to drive multiple LED strings with current matching from an AC source from 90VAC to 300VAC. The circuit is power factor corrected and provides high efficiency and good line regulation.

230-V, 250-W, High Efficiency BLDC Motor Drive w/DC Bus Voltage Ripple Compensation Reference Design

TIDA-00472: The TIDA-00472 is a discrete IGBT-based three-phase inverter for driving brushless DC (BLDC) motors rated up to 250 W, for example, used in cooker hoods, using a sensor-less, trapezoidal control method. The design provides software implementation for DC bus voltage ripple compensation resulting in 30% reduction in the DC bus capacitor requirement and reduced overall BOM cost. The cycle-by-cycle overcurrent protection feature protects the power stage from large current spikes and the board can work up to 65°C ambient. This design has also been tested to pass EN55014 standards for conducted emissions, Surge and EFT.

Primary-Side Regulated Flyback with 85 to 265VAC Input (12V @ 0.5A) Reference Design

PMP8787: The PMP8787 reference design uses the UCC28700 flyback controller to generate a 12V/500mA output from a univeral AC input. The primary-side regulation technique implemented by the UCC28700 eliminates the need for an opto coupler, reducing the size and cost of the design. In addition, the valley switching of the UCC28700 allows this design to achieve a maximum load efficiency over 80%; no load losses are less than 40mW. The circuit board measures only 28mm by 33mm, with a maximum height below 20mm.

< / 共 7 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

CRCW060351R1FKEA

详细参数

CAD 模型信息

Part Symbol

Footprint

3D Model

可下载的格式

文档下载

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

CRCW060351R1FKEA

详细参数

CAD 模型信息

Part Symbol

Footprint

3D Model

可下载的格式

文档下载

参考设计

价格走势

库存走势

完善邮箱信息

系统提示

站内导航

友情链接

联系我们

美国总部

苏州总部