TPS60403DBVT中文资料_PDF数据手册

TPS60403DBVT

加入BOM

Texas Instruments

60mA Charge Pump Voltage Inverter with Fixed 250kHz Operation 5-SOT-23 -40 to 85

技术详情

价格 & 库存

详细参数

Source Content uid

TPS60403DBVT

Brand Name

Texas Instruments

不含铅

符合

Active

SOT-23

compliant

EAR99

8542.39.00.01

4849

0.69

5.25 V

1.6 V

5 V

R-PDSO-G5

2.9 mm

85 °C

-40 °C

0.06 A

-1.6 V

-5.25 V

PLASTIC/EPOXY

LSSOP

RECTANGULAR

260

Not Qualified

1.45 mm

YES

DOUBLER INVERTER

400 kHz

INDUSTRIAL

GULL WING

0.95 mm

DUAL

1.6 mm

参考设计

(5)

TIDA-00777 Active Integrator for Rogowski Coil Reference Design with Improved Accuracy for Relay and Breaker | TI.com

TIDA-00777: The TIDA-00777 TI Design shows an active integrator design that covers wide input current range for Rogowski Coil with excellent accuracy, linearity, stability and repeatability. The integrator uses a precision amplifier with very low offset and temperature drift. Two configurations of the integrator are shown; one for precision measurement with less than 3O phase error and the other for fast response time (<15ms RC). While the output signal is bipolar, optional level shifting stage can be used when unipolar output is required.

TIDA-00835 High Accuracy ±0.5% Current and Isolated Voltage Measurement Ref Design Using 24-Bit Delta-Sigma ADC | TI.com

TIDA-00835: The TIDA-00835 reference design allows for accurate voltage and current measurement using a bipolar input configuration by incorporating a four- channel, 24-bit simultaneously-sampling differential input Delta-Sigma ADC over wide dynamic range. The ADC is configured to measure ±2.5 V bipolar input. The inputs are scaled to ADC measurement range of ±2.5V using a fixed gain amplifier. This AFE chains two ADCs together using a common external clock to expand the number of input channels to eight while simultaneously sampling all of the input channels. By having more measurement channels per module, overall system cost is reduced.

TIDA-00810 Reference Design to Measure AC Voltage & Current in Protection Relays w/Delta-Sigma Chip Diagnostics | TI.com

TIDA-00810: The TIDA-00810 reference design accurately measures analog inputs performance and includes chip diagnostics to help identify power systems failures early by using a highly accuracy AC voltage and current measurement analog front end (AFE) and a four-channel, 24-bit simultaneously-sampling differential input Delta-Sigma ADC for measurement over wide dynamic range. The ADC is configured to measure 0-5 V unipolar. The inputs are scaled to ADC measurement range using a fixed gain amplifier with 2.5 V DC output level shift. The AFE can be used to measure output of a current transformer, potential divider with analog isolation and Rogowski active integrator. The AFE uses 10-Bit low resolution successive approximation register (SAR) ADC in parallel with a 24 bit ∑-∆ ADC for ADS131A04 diagnostics.

TIDA-00942 12-bit, 20-MSPS Data Acquisition Reference Design for Digitizer | TI.com

TIDA-00942: This reference design enables a cost-effective and low-power data acquisition system that provides an alternative to FPGA-based systems. It features a single-ended, high-impedance input that can be used in a wide number of applications, including portable instrumentation and digitizers. The reference design utilizes the ADS4122 analog-to-digital converter (ADC), along the with the OPA656 and THS4541 operational amplifiers (op amps) to develop a 12-bit, 20-MSPS digitizer for the BeagleBone Cape form factor. The expansion board devleoped in this reference design interfaces with the BeagleBone Black development platform, which is a low-cost, open-source, community-supported environment based on the ARM Cortex-A8 processor.

TIDA-00799 Quad-Channel, 12-Bit, 50-MSPS ADC Reference Design With Low Noise, Low Distortion, DC and AC Inputs | TI.com

TIDA-00799: This reference design demonstrates how to implement a single-ended-to-differential input path, which can be AC-coupled or DC-coupled for an ADC3422. It also explains how to design a high-input impedance, DC-coupled input path. The reference design can be used for applications such as low-power data acquisition, portable instrumentation and IGBT diagnositics.

< / 共 5 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

TPS60403DBVT

详细参数

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

TPS60403DBVT

详细参数

参考设计

价格走势

库存走势

完善邮箱信息

站内导航

友情链接

联系我们

美国总部

苏州总部