TAJA475K006RNJ中文资料_PDF数据手册

加入BOM

Kyocera AVX Components

Tantalum Capacitor, Polarized, Tantalum (dry/solid), 6.3V, 10% +Tol, 10% -Tol, 4.7uF, Surface Mount, 1206, CHIP, ROHS COMPLIANT

技术详情

价格 & 库存

详细参数

不含铅

符合

Active

CHIP

compliant

EAR99

8532.21.00.50

13 weeks

1.31

4.7 µF

TANTALUM CAPACITOR

TANTALUM (DRY/SOLID)

6000 mΩ

1.6 mm

0.0005 mA

3.2 mm

SURFACE MOUNT

10%

125 °C

-55 °C

RECTANGULAR PACKAGE

SMT

TR, PLASTIC, 7 INCH

POLARIZED

10%

6.3 V

45 mA

1206

YES

0.06

J BEND

1.6 mm

参考设计

(12)

Altera Arria V FPGA Power Supply Reference Design - PMP9357.1 - TI Tool Folder

PMP9357: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.

Altera Arria V GZ FPGA Discrete Power Solution Reference Design

PMP9357: The PMP9357 reference design is a complete power solution for Altera's Arria V series FPGAs. This design uses several TPS54620 synchronous step down converters, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. To provide correct power sequencing, a UCD90120A power supply sequencer/monitor is used and can be controlled through I2C.

Altera Arria V GX FPGA Power Solution Reference Design

PMP9449: The PMP9449 reference design provides all the power supply rails necessary to power Altera's Arria® V GX family of FPGAs. It utilizes a TPS38600 to monitor the input supply and provide power on sequencing. This design features low cost, small footprint discrete ICs and is powered from a single 5V input.

Altera Arria V FPGA Power Supply Reference Design

PMP9357.1: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.

Altera Arria V FPGA Power Supply Reference Design

PMP9357.2: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.

Altera Arria V FPGA Power Supply Reference Design - PMP9357.2 - TI Tool Folder

PMP9357: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.

Altera Arria V FPGA Power Supply Reference Design

PMP9357.5: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.

FPGA Firmware Project for Measuring Bit Errors in the Output Word of an A to D Converter

TIDA-00070: For applications where there are bit errors and resulting sample errors (also called sparkle codes, word errors, or code errors), the ability to measure the Error rates caused by these bit errors is important. This FPGA firmware based application note proposes a method to accurately measure these errors over an indefinite time and provides an example of how this measurement can be done using a simple FPGA platform. Code is available on request for the two examples described in the application note.

Altera Arria V FPGA Power Supply Reference Design

PMP9357.6: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.

Synchronizing Multiple JESD204B ADCs for Emitter Position Location Reference Design

TIDA-00467: A common technique to estimate the position of emitters uses the amplitude and phase shift data of a signal derived from an array of spatially distributed sensors. For such systems, it is important to guarantee a deterministic phase relationship between the sensors to minimize errors in the actual measured data. This application design will discuss how multiple Analog to Digital Converters (ADCs) with a JESD204B interface can be synchronized so that the sampled data from the ADCs are phase aligned.

Altera Arria V FPGA Power Supply Reference Design

PMP9357.4: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.

Altera Arria V FPGA Power Supply Reference Design

PMP9357.3: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.

< / 共 12 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

TAJA475K006RNJ

详细参数

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

TAJA475K006RNJ

详细参数

参考设计

价格走势

库存走势

完善邮箱信息

站内导航

友情链接

联系我们

美国总部

苏州总部