Si2302中文资料_PDF数据手册

加入BOM

Power Field-Effect Transistor, 3A I(D), 20V, 0.072ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, LEAD FREE, PLASTIC PACKAGE-3

技术详情

价格 & 库存

详细参数

不符合

Active

SOT-23, 3 PIN

compliant

EAR99

2937

6.92

20 V

3 A

0.027 Ω

45 pF

R-PDSO-G3

ENHANCEMENT MODE

150 °C

-55 °C

PLASTIC/EPOXY

RECTANGULAR

SMALL OUTLINE

N-CHANNEL

1.25 W

10 A

Not Qualified

YES

TIN LEAD

GULL WING

DUAL

SWITCHING

SILICON

140 ns

75 ns

文档下载

SI2302DS Nexperia 也适用于 SI2302DS,215 ,SI2302DS SI2302ADST1 Vishay Dale 也适用于 SI2302ADS ,SI2302ADST1 SI2302ADST1 Vishay Dale 也适用于 SI2302ADS ,SI2302ADST1

参考设计

(8)

LDO, Buck/Boost, 2 Sync Buck, Sync Boost Reference Design

PR038: LDO, Buck/Boost, 2 Sync. Buck, Sync. Boost with Vin 2.7-4.2 V LiION or 4.5-6.5 V adapter. Multiple output voltages of 1.5 V, 2.5 V, 3.3 V and 8 V. The total output power is 5.5 W.

15V -> +/-23V @ 100mA

PMP5709.2: The PMP5709 +23.0V/-23.0V @ 100mA isolated flyback converter generates a positive and a negative output voltage from an input of 15V. It is a cheap solution for low output power.

15V -> +/-5V @ 35mA

14..24V -> 15V @ 0.9A - PMP5709.1 - TI Tool Folder

PMP5709: The PMP5709 15.0V @ 0.9A isolated flyback converter generates one output voltage from a 14-24V input. The input voltage range makes it ideal for industrial applications.

Flyback (-3.3V@10mA) for Seismic

PMP5317.2: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.

Flyback (7V@3.5mA) for Seismic - PMP5317.3 - TI Tool Folder

PMP5317: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.

Flyback (3.3V@8mA) for Seismic

PMP5317.1: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.

Flyback (7V@3.5mA) for Seismic

PMP5317.3: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.

< / 共 8 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

Si2302

详细参数

文档下载

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

Si2302

详细参数

文档下载

参考设计

价格走势

库存走势

完善邮箱信息

站内导航

友情链接

联系我们

美国总部

苏州总部