SNT-100-BK-G中文资料_PDF数据手册

SNT-100-BK-G

加入BOM

Interconnection Device, ROHS COMPLIANT

技术详情

价格 & 库存

详细参数

不含铅

符合

Active

compliant

EAR99

8536.69.40.40

0.42

0.1 inch

0.24 inch

0.2 inch

PLUG

INTERCONNECTION DEVICE

FEMALE

PHOSPHOR BRONZE

RECTANGULAR

5 mΩ

8.896 N

BLACK

0.1 inch

STRAIGHT

ONE

125 °C

-55 °C

10u inch

4.3 A

.5282 N

文档下载

SNT-100-BK-G Samtec Inc 也适用于 SNT100BLH ,SNT100BLG ,SNT-100-BK-G-H 等其余

参考设计

(5)

RF Sampling 4-GSPS ADC Reference Design with 8-GHz DC-Coupled Differential Amplifier

TIDA-00431: Wideband radio frequency (RF) receivers allow greatly increased flexibility in radio designs. The wide instantaneous bandwidth allows flexible tuning without changing hardware and the ability to capture multiple channels at widely separated frequencies. This reference design describes a wideband RF receiver utilizing a 4-GSPS analog-to-digital converter (ADC), with an 8-GHz, DC-coupled, fully differential amplifier front end. The amplifier front end provides signal gain and allows capture of signals down to DC, which is not possible with a balun-coupled input.

15 Cell Lithium Ion Battery Controller Analog Front End Reference Design

TIDA-00255: The TIDA00255 reference design utilizes the bq76940 analog front end (AFE) IC. It measures cell voltages, and die temperature or external thermistor voltage using a 14 bit ADC. Current is measured separately by a separate 16 bit coulomb counter. The design can turn off low side power FETs to stop discharge or charge based on selected hardware limits. A microcontroller not included in this design would be part of the battery controller to communicate to the AFE to set protection thresholds, turn on the power FETs, provide fault recovery and turn off the FETs for over or under temperature conditions. A battery controller design may contain other features which are not part of this reference design such as secondary over voltage protection, gauging, and isolated communication to let the system know the state of the battery.

Power Cycling Reference Design to Extend Battery Life Using an Ultra-Low IQ LDO and Nano Timer

TIDA-00720: The TIDA-00720 reference design shows a method to extend battery life by power cycling. The power cycling concept consist in time interval period that enables the power management devices for just enough time for the microcontroller to execute the program, transmit data or collect data. Some of the MCUs have sleep modes with low stand-by currents, but the power management devices will continue to dissipate power if they are left enabled. The current leakage is higher during the enabled mode and will add up to the total power waste during the MCU sleep cycles. This design is ideal for systems that operate for various years without replacing the battery; these systems do not need to run constantly instead they operate in periodic intervals of seconds, minutes or even an hour in between operating time.

LP5910 and TPS61221 as Power Reference Design for devices Interacting with Ultra-Low Voltage MSP430

TIDA-00599: The MSP430X09X can operate form ultra-low voltages (ULV) in the range of 0.9V to 1.65V; however most of the devices in the system requires higher voltages. TIDA-00599 provides a solution for those companion devices that requires 1.8V and 3.3V input voltages. A 3.3V voltage rail is generated from a 0.9V to 1.65 V batteries using the TPS61221 boost converter and a 1.8V voltage rail is generated using a high PSRR LDO (LP5910) connected in series with the boost converter output voltage rail. The combine output current is 100 mA at 1.65V input voltage and 50 mA at 0.90 V input voltage. This power solution is deal to power sensors and peripherals from the same ultra-low voltage source powering the MSP430 family line.

Clocking Solution Reference Design for GSPS ADCs

TIDA-00359: Low cost, high performance clocking solution for GSPS data converters. This reference design discusses the use of a TRF3765, a low noise frequency synthesizer, generating the sampling clock for a 4 GSPS analog-to-digital converter (ADC12J4000). Experiments demonstrate data sheet comparable SNR and SFDR performance.

< / 共 5 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

SNT-100-BK-G

详细参数

文档下载

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

SNT-100-BK-G

详细参数

文档下载

参考设计

价格走势

库存走势

完善邮箱信息

站内导航

友情链接

联系我们

美国总部

苏州总部