无法从文档中提取型号,请重试

Update your browser

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience for this site.

首页 > 电子元器件选型 > 微控制器和处理器 > 微控制器

MSP430F5438AIPZ

加入BOM

MSP430F5438AIPZ
已加入BOM:

Texas Instruments

25-MHz MCU with 256-KB flash, 16-KB SRAM, 12-bit ADC, DMA, UART/SPI/I2C, timer, HW multiplier 100-LQFP -40 to 85

市场均价:
¥52.3981
市场总库存:
-
生命周期状态: Active
技术详情
价格 & 库存
替代料

参考设计

(4)
TIDM-RF-SENSORNODE RF Sensor Node Development Platform for 6LoWPAN and 2.4 GHz Applications | TI.com
TIDM-RF-SENSORNODE: The RF Sensor Node Platform is intended as a miniature development platform for 6LoWPAN and 2.4 GHz applications. The platform has three on-board sensors which includes a 3-axis accelerometer, a temperature sensor and two light sensors. The RF Sensor Node Platform can be a stand-alone sensor node or can be paired to either a PLC (Power-line communication) board or an RF interface board, making a hybrid node. The RF node supports 2.4GHz RF protocols which includes 6LoWPAN or ZigBee®. Since the links between the nodes can be wired and/or wireless, hybrid networks offer better reliability and noise resistance than traditional nodes.
RF Sensor Node Development Platform for 6LoWPAN and 2.4 GHz Applications
TIDM-RF-SENSORNODE: The RF Sensor Node Platform is intended as a miniature development platform for 6LoWPAN and 2.4 GHz applications. The platform has three on-board sensors which includes a 3-axis accelerometer, a temperature sensor and two light sensors. The RF Sensor Node Platform can be a stand-alone sensor node or can be paired to either a PLC (Power-line communication) board or an RF interface board, making a hybrid node. The RF node supports 2.4GHz RF protocols which includes 6LoWPAN or ZigBee®. Since the links between the nodes can be wired and/or wireless, hybrid networks offer better reliability and noise resistance than traditional nodes.
TIDC-DSSS868WMBUS-DC Battery-powered Data Collector for wM-Bus T-/C-mode & DSSS-coded Data Packets @ 868.95MHz Ref Design | TI.com
TIDC-DSSS868WMBUS-DC: The TIDC-DSSS868WMBUS-DC TI Design is a solution that enables Data Collectors with optimized firmware for receiving wireless M-Bus (wM-Bus) packets in frequent transmission (T-) and compact (C-) modes at 868.95MHz. For improved range a customized Direct Sequence Spread Spectrum (DSSS)-coded packet reception is also supported. This reference design can be adapted for wM-Bus and DSSS-enabled Data Collectors and mobile readers at 169 MHz and 433 MHz bands.
Battery-powered Data Collector for wM-Bus T-/C-mode & DSSS-coded Data Packets @ 868.95MHz Ref Design
TIDC-DSSS868WMBUS-DC: The TIDC-DSSS868WMBUS-DC TI Design is a solution that enables Data Collectors with optimized firmware for receiving wireless M-Bus (wM-Bus) packets in frequent transmission (T-) and compact (C-) modes at 868.95MHz. For improved range a customized Direct Sequence Spread Spectrum (DSSS)-coded packet reception is also supported. This reference design can be adapted for wM-Bus and DSSS-enabled Data Collectors and mobile readers at 169 MHz and 433 MHz bands.
显示更多价格 & 库存吗?

价格走势

库存走势

No Data Available
显示更多替代料吗?
新建BOM