BLM18HG601SN1D中文资料_PDF数据手册

BLM18HG601SN1D

加入BOM

muRata(村田)

muRata(村田)
MURATA/村田

Ferrite Chip, 1 Function(s), 0.2A, EIA STD PACKAGE SIZE 0603, 2 PIN

技术详情

价格 & 库存

详细参数

不含铅

符合

Active

compliant

EAR99

8504.50.80.00

9 weeks

0.73

MONOLITHIC TYPE

0603

Chip Bead

1 Ω

FERRITE CHIP

1000 MHz

100 MHz

0.8 mm

1.6 mm

SURFACE MOUNT

125 °C

-55 °C

600 OHM Ω

TAPE

0.2 A

Tin (Sn)

0.8 mm

参考设计

(4)

Single-Channel Industrial Voltage & Current Output Driver, Isolated, EMC/EMI Tested Reference Design

TIPD153: This TI CerTIfied Reference Design implements a isolated single-channel industrial voltage and current output module using the DAC8760 and ISO7641. The circuit features a digitally controlled voltage or current output that produces the standard outputs of 0-20mA, 0-24mA, 4-20mA, 0-5V, +/-5V, 0-10V and +/-10V outputs based on the internal register settings of the DAC8760. The design includes the required external protection circuitry needed to pass the IEC61000-4-2/3/4/6 tests and IEC61000-4 test results are included. The protection circuitry does not negatively affect the voltage or current output performance resulting in <0.1% total unadjusted error (TUE) for both outputs.

Two-Channel Source/Sink Combined Voltage & Current Output, Isolated, EMC/EMI Tested Reference Design

TIPD155: This TI CerTIfied Reference Design implements a two channel combined voltage and current analog output module. The two outputs are independent and can both source and sink voltage and current over the standard industrial output ranges. While the design has been characterized with outputs of ±10 V and ±24 mA, output ranges of 0-5 V, 0-10 V, ±5 V, ±10 V.4-20 mA, 0-20 mA, 0-24 mA, ±20 mA, ±24 mA are possible by adjusting external resistor values. The design includes the necessary external protection elements required to pass the IEC61000-4-2/3/4/5/6 tests along with the measured test data. The protection circuitry does not negatively affect the design and test results showed typical unadjusted errors were <0.1% of the full-scale range (FSR) and calibrated errors were less than 0.01% FSR.

Analog Input Module for Industrial Outputs and Temperature Sensors Reference Design

TIPD164: This TI Designs, Precision Verified design implements an analog input module for industrial voltages, currents, and temperature sensors. For industrial outputs, the possible input ranges include: 4-20 mA, 0-20 mA, +/-25 mA, 0-5 V, 0-10 V, +/-5 V, +/-10 V. The design includes conditioning and level-shift circuitry which converts the large industrial outputs into a proper input range for a +5V delta-sigma ADC. The ADC has features to directly acquire information from the RTD and thermocouple sensors over their full temperature range.

Isolated Loop Powered Thermocouple Transmitter Reference Design

TIDA-00189: The Isolated Loop powered Thermocouple Transmitter reference design is a system solution providing precision K-type thermocouple measurements for 4 to 20-mA isolated current-loop applications. This design is intended as an evaluation module for users to fast prototype and develop end-products for process-control and factory-automation. Potential challenges with thermocouples as a temperature sensor include tiny voltage outputs, low sensitivity and nonlinearity; in addition, because in industrial environments ground potential differences higher than 100V are common, thermocouple and signal conditioning circuitry must be galvanically isolated. The design files include design considerations, block diagrams, schematics, Bill of Materials (BOM), layer plots, Altium files, Gerber Files, and MSP430 Firmware. Watch the TIDA-00349 Overview video, covering the same isolated power topology as used in the TIDA-00189 NOW

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

BLM18HG601SN1D

详细参数

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

登录

BLM18HG601SN1D

详细参数

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部