1N4937中文资料_PDF数据手册

1N4937

加入BOM

Rectifier Diode, 1 Element, 1A, 650V V(RRM), Silicon, DO-41, DO-41, 2 PIN

技术详情

价格 & 库存

详细参数

Active

DO-41

DO-41, 2 PIN

unknown

EAR99

8541.10.00.80

6.39

ISOLATED

SINGLE

SILICON

RECTIFIER DIODE

1.2 V

DO-41

O-LALF-W2

30 A

100 °C

-65 °C

1 A

GLASS

ROUND

LONG FORM

Not Qualified

650 V

0.3 µs

WIRE

AXIAL

文档下载

1N4937 Fairchild Semiconductor Corporation 也适用于 1N4937 1N4937 ON Semiconductor 也适用于 1N4934RL ,1N4933RLG ,1N4934 等其余 1N4937 Diodes Incorporated 也适用于 1N4933-T ,1N4936-B ,1N4936-A 等其余 1N4933-E3/54 Vishay Semiconductors 也适用于 1N4936/4 ,1N4934-E3/51 ,1N4934-E3/54 等其余 1N4937 Digitron Semiconductors 也适用于 1N4934 ,1N4933 ,1N4937 等其余 1N4937 EIC Semiconductor Inc 也适用于 1N4934 ,1N4933 ,1N4937 等其余 1N4935 Diodes Incorporated 也适用于 1N4934GL-T ,1N4936GL-T ,1N4936G-B 等其余 1N4937G EIC Semiconductor Inc 也适用于 1N4936G ,1N4937G ,1N4933G 等其余 1N4935GP-E3/54 Vishay Semiconductors 也适用于 1N4937GP/4 ,1N4936GP-E3/51 ,1N4934GP-HE3/4 等其余

参考设计

(3)

Current Controlled Driver for 230V AC Solenoids Reference Design

TIDA-00284: TIDA-00284 proposes to integrate current control and plunger movement detection into an AC solenoid coil. This reference design provides a solution to control the solenoid current using a PWM-based controller along with a Hall sensor to detect plunger movement and switch from peak current to hold current mode Various applications in the field of industrial automation and material processing will benefit from up-to 70% reduced power consumption, accelerated process time, greatly simplified usage and enhanced monitoring capabilities.

Single-Phase Inverter Reference Design With Voltage Source and Grid Connected Modes

TIDM-HV-1PH-DCAC: This reference design implements single-phase inverter (DC-AC) control using the C2000™ F28377D microcontroller. Design supports two modes of operation for the inverter. First is the voltage source mode using an output LC filter. This control mode is typically used in uninterruptible power supplies (UPS). Second is grid connected mode with an output LCL filter, which is typically used in solar inverters. Firmware for the design is supported under the powerSUITE framework which enables adaptation using the Solution Adapter and enables tuning of the control loop using the Compensation Designer and SFRA. High-efficiency, low THD and intuitive software make this design attractive for engineers working on inverter design for UPS and alternative energy applications such as PV inverters, grid storage and micro grids.

30W Ultra Wide Range Power Supply for Protection Relays Reference Design

TIDA-00127: This power supply solution for Protection Relays handles an ultra-wide range of both AC (88-276V AC) and DC (24-250V DC) inputs making it a suitable platform to power a variety of Protection Relays. The power supply is designed to output industry standard voltages (such as +/- 12V and isolated 6.75V) required in many Protection Relays while also providing excellent line and load regulation (< +/- 3%). This solution has been engineered for high wattage (30W) with good efficiency (up to 78%) and has also been pre-compliance tested for IEC61000-4 (EFT and Surge) and CISPR 11 Class A (Interference).

< / 共 3 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

1N4937

详细参数

文档下载

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

1N4937

详细参数

文档下载

参考设计

价格走势

库存走势

完善邮箱信息

站内导航

友情链接

联系我们

美国总部

苏州总部