BAV70_datasheet and more on bom2buy.com

360W Digital Controlled Phase Shift Full Bridge converter

TIDA-00412: DC-DC power converter with digital control using UCD3138CC64EVM-030 daughter-card. The daughter-card with preloaded firmware providing the required control functions for a Phase Shift Full Bridge converter. The TIDA-00412 (UCD3138PSFBEVM-027) accepts a DC input from 370 to 400 VDC, and outputs a typical 12 VDC with full-load output power at 360 W, or full output current of 30 A.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks

PMP9461.3: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

90 to 264Vac In 100W 4x500mA LED Lighting Driver W/O Aux Flyback Power Supply f/Vcc Reference Design

PMP4302B: This reference design uses TI multi-transformer LLC controller UCC25710 and transition mode PFC controller UCC28810 to develop a 100W four strings with 500mA per string output for general LED lighting driver. The key benefits for this solution are high efficiency, high power factor and good current matching. Meanwhile, the reference design uses innovative self start up circuit to supply Vcc on the primary side (UCC28810) and secondary side (UCC25710), and it does not use any auxilary Flyback to power main controllers. The application can be used in general LED lighting such as street light and commercial light.

8 Channel 1A/Ch High Side Driver for Programmable Logic Controller (PLC) Reference Design

TIDA-00183: The TIDA-00183 shows a high density, high power digital output circuitry with full protection and isolation for programmable logic controllers in factory automation and control environment. The BeagleBone-Black cape formfactor allows easy evaluation of the used driver chips and the interoperation with an MSP430 MCU for innovative protection schemes.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks - PMP9461.4 - TI Tool Folder

PMP9461: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks

PMP9461.5: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks - PMP9461.7 - TI Tool Folder

PMP9461: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks - PMP9461.1 - TI Tool Folder

PMP9461: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks

PMP9461.4: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks

PMP9461.6: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks

PMP9461.7: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Complete Gate Drive and Bias Power Solution for Solar Microinverter's DC/DC and DC/AC Blocks

PMP9461: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks

PMP9461.1: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Complete Gate Drive and Bias Power Solution for Solar MicroInverter's DC/DC and DC/AC Blocks

PMP9461.2: PMP9461 is a reference design with complete power and gate drive requirements for grid tie solar microinverters. The major goal of the reference design is to acheive significant integration and perfomance enhancement in gate drive as well as the bias supply segment of microInverters. The solution features SM72295 (full bridge gate driver with integrated current sense), SM74101 (7A Sink/3A source single driver), SM72482 (5A dual low side driver), LM5017 (as primary and secondary bias supply provider), and again the LM5017 for powering up the drivers in DC/AC section of inverters. All bias supplies are generated using cost effective and highly efficent Fly-BuckTM topology.

Campaign name:
Campaign period:
Campaign distributor:

Discount information:
Campaign description:

Help

Related Sites

Contact Us

US Headquarters

Suzhou Office

Create BOM

Sign In

Help

Related Sites

Contact Us

US Headquarters

Suzhou Office