参考设计
(25)
12V 1A Isolated PoE PD Power Supply Reference Design
PMP940: PMP940 is a high efficiency, isolated, synchrounous flyback Power-over-Ethernet PD power supply reference design intended to ease implementation of PoE in devices such as IP phones, WLAN AP's and security cameras. The reference design uses a TPS2375 PoE Powered Device Controller to implement all necessary detection, classification, inrush current limiting, UVLO and switch FET control necessary to be compliant with the IEEE802.3af Power-over-Ethernet standard. A UCC3809 Economy Primary Side Controller is used to generate 12V at 1A from the 48V PoE input. The design is optimized for maximum efficiency in the smallest board area possible.
Isolated, Low Cost, Non-Synchronous PoE PD Power Supply Reference Design
PMP717: PMP717 is a low cost, isolated, non-synchrounous Power-over-Ethernet PD power supply reference design intended to ease implementation of PoE in devices such as IP phones, WLAN AP's and security cameras. The reference design uses a TPS2375 PoE Powered Device Controller to implement all necessary detection, classification, inrush current limiting, UVLO and switch FET control necessary to be compliant with the IEEE802.3af Power-over-Ethernet standard. A UCC3809 Economy Primary Side Controller is used to generate 3.3V at 1.5A from the 48V PoE input. The design is optimized for low cost and smallest board area possible.
Flyback, Linear Regulator for Medical Pack (5V @ 440mA)
PMP2187.2: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (5.75V @ 10mA)
PMP2187.8: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Isolated Sync Flyback (5V @ 0.2A) for Motor Control
PMP2431: This low-cost (1W) isolated synchronous flyback regulator produces a 5V output from a low 24V input voltage and obtains a full-load efficiency of 85%. Possible applications include security systems, industrial, telecom and medical.
Buck-Boost charge pump (-48V @ 0.03A) for Routers
PMP3065.2: This circuit creates dual-inverting outputs from a 3.3V input, while being very compact. Excellent voltage regulation is achieved with the use of a voltage doubler as well as direct feedback regulation through a simple level-shift circuit.
Flyback, Linear Regulator for Medical Pack (-5V @ 10mA)
PMP2187.6: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (3.3V @ 220mA)
PMP2187.4: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (5V @ 50mA)
PMP2187.3: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (5.5V @ 500mA)
PMP2187.1: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (4V @ 250mA)
PMP2187.7: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Buck-Boost charge pump (-24V @ 0.04A) for Routers
PMP3065.1: This circuit creates dual-inverting outputs from a 3.3V input, while being very compact. Excellent voltage regulation is achieved with the use of a voltage doubler as well as direct feedback regulation through a simple level-shift circuit.
Flyback, Linear Regulator for Medical Pack (2.5 @ 2mA)
PMP2187.5: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.