参考设计
(30)
TIDA-00821 Reference Design for 6-Cell EV/HEV Integrated Battery Monitor and Protector w/Passive Balancing | TI.com
TIDA-00821: The TIDA-00821 reference design is a stackable monitor and protector for use in large format Lithium-ion batteries that provides monitoring, balancing, and communications. Each bq76PL536A-Q1 EVM can manage 3 to 6 cells for Li-ion battery applications. Up to 32 bq76PL536A-Q1 EVM modules can be stacked. The system provides fast cell balancing, diagnostics, and module to controller communication. Independent protection circuitry is also integrated.
Altera Arria V GZ FPGA Discrete Power Solution Reference Design
PMP9357: The PMP9357 reference design is a complete power solution for Altera's Arria V series FPGAs. This design uses several TPS54620 synchronous step down converters, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. To provide correct power sequencing, a UCD90120A power supply sequencer/monitor is used and can be controlled through I2C.
TIDA-00070 FPGA Firmware Project for Measuring Bit Errors in the Output Word of an A to D Converter | TI.com
TIDA-00070: For applications where there are bit errors and resulting sample errors (also called sparkle codes, word errors, or code errors), the ability to measure the Error rates caused by these bit errors is important. This FPGA firmware based application note proposes a method to accurately measure these errors over an indefinite time and provides an example of how this measurement can be done using a simple FPGA platform. Code is available on request for the two examples described in the application note.
CC2538EM Reference Design
CC2538EM-RD: This 2.4 GHz RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the license free 2.4 GHz frequency band.
CC2531EM-IOT-LIGHTING-GATEWAY-RD Residential Lighting Gateway for IoT Applications Reference Design | TI.com
CC2531EM-IOT-LIGHTING-GATEWAY-RD: This design provides a reference ZigBee® gateway for IoT lighting applications. Feature-rich, Linux-based Network & GUI applications powered by Sitara™ AM335x processor can control and monitor ZigBee lighting nodes using the SimpleLink™ ZigBee CC2531 wireless MCU. This design includes example applications for local and remote control of ZigBee nodes, including Android (phones/tablets/set top boxes), Java-script for cloud connectivity agents and C-clients.
CC2531EM-IOT-HOME-GATEWAY-RD ZigBee Home Automation Gateway reference design | TI.com
CC2531EM-IOT-HOME-GATEWAY-RD: A gateway is a bridge that connects wireless devices to the Internet. This Linux-based Home Automation Gateway enables remote monitoring and control of ZigBee® powered nodes and devices inside the home. This gateway reference design includes ZigBee Home Automation (HA 1.2) certified software stack and tens of APIs that simplify ZigBee integration and application development in a Linux system.
Residential Lighting Gateway for IoT Applications Reference Design
CC2531EM-IOT-LIGHTING-GATEWAY-RD: This design provides a reference ZigBee® gateway for IoT lighting applications. Feature-rich, Linux-based Network & GUI applications powered by Sitara™ AM335x processor can control and monitor ZigBee lighting nodes using the SimpleLink™ ZigBee CC2531 wireless MCU. This design includes example applications for local and remote control of ZigBee nodes, including Android (phones/tablets/set top boxes), Java-script for cloud connectivity agents and C-clients.
Chronos Personal Area Network and Sensor Node Development System Reference Design
TIDM-CHRONOS-PAN: This reference design features a highly integrated, wearable wireless development system provided in a sports watch form-factor. It may be used as a reference platform for watch systems, a personal display for personal area networks, or as a wireless sensor node for remote data collection. Based on the CC430F6137 <1 GHz RF SoC, the eZ430-Chronos is a complete CC430-based development system contained in a watch and features a 96 segment LCD display, an integrated pressure sensor and 3-axis accelerometer for motion sensitive control.
Bluetooth Low Energy (Bluetooth Smart) to RS-485 Gateway
TIDC-BLUETOOTH-SMART-TO-RS-485-GATEWAY: Modbus is an application protocol for serial data transmission that often uses RS-485 for serial data transfer. This reference design implements a gateway between Modbus and the Bluetooth® Smart CC2540 wireless MCU. It serves as a replacement for wires in an RS-485 network, and it allows another Bluetooth® Smart-compatible device like a computer or smartphone to easily connect to an existing RS-485 network.
FPGA Firmware Project for Measuring Bit Errors in the Output Word of an A to D Converter
TIDA-00070: For applications where there are bit errors and resulting sample errors (also called sparkle codes, word errors, or code errors), the ability to measure the Error rates caused by these bit errors is important. This FPGA firmware based application note proposes a method to accurately measure these errors over an indefinite time and provides an example of how this measurement can be done using a simple FPGA platform. Code is available on request for the two examples described in the application note.
PMP9357 Altera Arria V FPGA Power Supply Reference Design | TI.com
PMP9357: The PMP9357 reference design is a complete power solution for Altera's Arria V series FPGAs. This design uses several TPS54620 synchronous step down converters, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. To provide correct power sequencing, a UCD90120A power supply sequencer/monitor is used and can be controlled through I2C.
CC2540 Bluetooth Low Energy USB Dongle Reference Design
TIDC-CC2540-BLE-USB: The CC2540 USB Dongle is a complete example of how to use the USB enabled Bluetooth Low Energy (BLE) Wireless MCU. The reference design can be used to enable Bluetooth Smart and Internet of Things applications on any system that contains a USB host.
CC2538EM-RD CC2538EM Reference Design | TI.com
CC2538EM-RD: This 2.4 GHz RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the license free 2.4 GHz frequency band.
PMP9357 Altera Arria V FPGA Power Supply Reference Design | TI.com
PMP9357: The PMP9357 reference design is a complete power solution for Altera's Arria V series FPGAs. This design uses several TPS54620 synchronous step down converters, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. To provide correct power sequencing, a UCD90120A power supply sequencer/monitor is used and can be controlled through I2C.
TIDC-BLUETOOTH-SMART-TO-RS-485-GATEWAY Bluetooth Low Energy (Bluetooth Smart) to RS-485 Gateway | TI.com
TIDC-BLUETOOTH-SMART-TO-RS-485-GATEWAY: Modbus is an application protocol for serial data transmission that often uses RS-485 for serial data transfer. This reference design implements a gateway between Modbus and the Bluetooth® Smart CC2540 wireless MCU. It serves as a replacement for wires in an RS-485 network, and it allows another Bluetooth® Smart-compatible device like a computer or smartphone to easily connect to an existing RS-485 network.
ZigBee Home Automation Gateway reference design
CC2531EM-IOT-HOME-GATEWAY-RD: A gateway is a bridge that connects wireless devices to the Internet. This Linux-based Home Automation Gateway enables remote monitoring and control of ZigBee® powered nodes and devices inside the home. This gateway reference design includes ZigBee Home Automation (HA 1.2) certified software stack and tens of APIs that simplify ZigBee integration and application development in a Linux system.
TIDM-CHRONOS-PAN Chronos Personal Area Network and Sensor Node Development System Reference Design | TI.com
TIDM-CHRONOS-PAN: This reference design features a highly integrated, wearable wireless development system provided in a sports watch form-factor. It may be used as a reference platform for watch systems, a personal display for personal area networks, or as a wireless sensor node for remote data collection. Based on the CC430F6137 <1 GHz RF SoC, the eZ430-Chronos is a complete CC430-based development system contained in a watch and features a 96 segment LCD display, an integrated pressure sensor and 3-axis accelerometer for motion sensitive control.
Simple White Dimmable ZigBee Connected LED Light for Home and Building Automation
TIDC-ZLIGHT2-W: This design features a wirelessly controlled, USB-powered light. Four white LEDs are connected in a single string driven by a TPS61061 LED driver which in turn is controlled by a CC2531 ZigBee Wireless MCU. This provides a low-cost and high-efficiency solution, suitable for connected lighting networks and Internet of Things (IoT) system applications.
