参考设计
(15)
TIDA-00214 Half-Duplex, Non-Isolated RS-485 BoosterPack Reference Design | TI.com
TIDA-00214: The Half-Duplex, Non-Isolated RS-485 BoosterPack allows for easy evaluation of TI’s RS-485 transceivers for applications such as building management systems (BMS), factory automation, building automation, and HVAC. The BoosterPack is designed and tested to support data rates up to 1.25 Mbps for cable lengths up to 1000 feet and a total of 32 nodes. The populated extended common-mode RS-485 transceiver can be easily removed and replaced with any TI half-duplex, 8-pin SOIC RS-485 transceiver. This allows the system designer to evaluate many different transceivers with varying performance targets. The RS-485 BoosterPack is compatible with 20-pin and 40-pin TI LaunchPads.
Energy Harvester Booster Pack Reference Design
TIDA-00588: The TIDA-00588 reference design is a BoosterPack that harvests energy from a wide variety of current sources or from the onboard solar cells to power any low-power TI LaunchPad. This design is a highly integrated power management solution that is well-suited for ultra-low power applications. There are three storage methods on this board: 1)A 47mF super capacitor, 2) a LIR2032 coin cell, and 3) an external battery connector. You can use the onboard solar cells or add your own AC or DC current source.
TIDA-00096 Wireless Heart Monitor with Bluetooth Low Energy | TI.com
TIDA-00096: The Wireless Heart Rate Monitor with Bluetooth low-energy (BLE) is intended as a reference design that customers can use to develop end-products for battery-powered, 3-channel health and fitness electrocardiogram (ECG) applications. The ADS1293 is a highly integrated low-power analog front end (AFE) which features three high-resoluiton ECG channels. The CC2541 system-on-chip (SoC) adds a BLE wireless feature to the platform which enables seamless connectivity to an iPhone(R) or an iPad(R) through a configurable iOS application where the end-user can remotely monitor a patient's heart rate data.
TIDA-00881 50mA Wireless Charger with 19mm Coil BoosterPack Reference Design | TI.com
TIDA-00881: The TIDA-00881 reference design is a booster pack that provides a wireless charger and an entire battery managment solution to power any low power TI Launchpad. This design is a highly integrated power management solution that is well-suited for ultra-low power applications using an off the shelf coil. The primary method of storage is an LIR2032 Lithium-Ion rechargable coin cell. There is a connector for an external battery if desired.
50mA Wireless Charger Booster Pack Reference Design
TIDA-00668: The TIDA-00668 is a booster pack that provides a wireless charger and an entire battery managment solution to power any low power TI Launchpad. This design is a highly integrated power management solution that is well-suited for ultra-low power applications. The primary method of storage is an LIR2032 Lithium-Ion rechargable coin cell. There is a connector for an external battery if desired.
TIDA-00668 50mA Wireless Charger Booster Pack Reference Design | TI.com
TIDA-00668: The TIDA-00668 is a booster pack that provides a wireless charger and an entire battery managment solution to power any low power TI Launchpad. This design is a highly integrated power management solution that is well-suited for ultra-low power applications. The primary method of storage is an LIR2032 Lithium-Ion rechargable coin cell. There is a connector for an external battery if desired.
Optical Heart Rate + Pedometer Reference Design on ARM Based Platform
TIDA-00682: The TIDA-00682 reference design demonstrates how biometric sensors in a watch form factor can be used to obtain a person's heart rate and steps in real time. By combining the AFE4404 front-end IC and the InvenSense ICM-20655 with the ultra-low power processing capability of the wireless CC2650, it is possible to measure step count activity plus a very robust and high performance optical heart rate signal on an ARM based platform.
Energy Storage Circuit for Uninterrupted Power Supply and Extending Alkaline Battery Lifetime
PMP9771: An alkaline battery and a boost converter are usually used to power the load system which requires high voltage, such as the motor driver in insulin pump. In this reference design, a lithium polymer battery is added to the output of the boost converter to absorb the pulse load current and extend the alkaline battery lifetime. The designed circuit also benefits uninterrupted power supply when the alkaline battery is out of charge.
TIDA-00588 Energy Harvester Booster Pack Reference Design | TI.com
TIDA-00588: The TIDA-00588 reference design is a BoosterPack that harvests energy from a wide variety of current sources or from the onboard solar cells to power any low-power TI LaunchPad. This design is a highly integrated power management solution that is well-suited for ultra-low power applications. There are three storage methods on this board: 1)A 47mF super capacitor, 2) a LIR2032 coin cell, and 3) an external battery connector. You can use the onboard solar cells or add your own AC or DC current source.
Wireless Heart Monitor with Bluetooth Low Energy
TIDA-00096: The Wireless Heart Rate Monitor with Bluetooth low-energy (BLE) is intended as a reference design that customers can use to develop end-products for battery-powered, 3-channel health and fitness electrocardiogram (ECG) applications. The ADS1293 is a highly integrated low-power analog front end (AFE) which features three high-resoluiton ECG channels. The CC2541 system-on-chip (SoC) adds a BLE wireless feature to the platform which enables seamless connectivity to an iPhone(R) or an iPad(R) through a configurable iOS application where the end-user can remotely monitor a patient's heart rate data.
PMP9771 Energy Storage Circuit for Uninterrupted Power Supply and Extending Alkaline Battery Lifetime | TI.com
PMP9771: An alkaline battery and a boost converter are usually used to power the load system which requires high voltage, such as the motor driver in insulin pump. In this reference design, a lithium polymer battery is added to the output of the boost converter to absorb the pulse load current and extend the alkaline battery lifetime. The designed circuit also benefits uninterrupted power supply when the alkaline battery is out of charge.
Gas Sensor Platform with Bluetooth Low Energy
TIDA-00056: This reference design is a low-power wireless gas sensor solution that supports a wide array of electrochemical gas sensors. With the versatility of a configurable interface for either Bluetooth® Low Energy, Zigbee RF4CE, 6LoWPAN or ANT this flexible and certified sensor solution is ideal for various building safety, industrial process control, mining, and health care applications.
TIDA-00056 Gas Sensor Platform with Bluetooth Low Energy | TI.com
TIDA-00056: This reference design is a low-power wireless gas sensor solution that supports a wide array of electrochemical gas sensors. With the versatility of a configurable interface for either Bluetooth® Low Energy, Zigbee RF4CE, 6LoWPAN or ANT this flexible and certified sensor solution is ideal for various building safety, industrial process control, mining, and health care applications.
Half-Duplex, Non-Isolated RS-485 BoosterPack Reference Design
TIDA-00214: The Half-Duplex, Non-Isolated RS-485 BoosterPack allows for easy evaluation of TI’s RS-485 transceivers for applications such as building management systems (BMS), factory automation, building automation, and HVAC. The BoosterPack is designed and tested to support data rates up to 1.25 Mbps for cable lengths up to 1000 feet and a total of 32 nodes. The populated extended common-mode RS-485 transceiver can be easily removed and replaced with any TI half-duplex, 8-pin SOIC RS-485 transceiver. This allows the system designer to evaluate many different transceivers with varying performance targets. The RS-485 BoosterPack is compatible with 20-pin and 40-pin TI LaunchPads.
TIDM-BIOSIGNMONITOR Multi-Parameter Bio-Signal Monitor Reference Design For Personal Monitoring | TI.com
TIDM-BIOSIGNMONITOR: The Multi-Parameter Bio-signal Monitor (MPBSM) is a proof-of-concept Evaluation Module (EVM) that is capable of measuring three of the four primary vital signs. The MPBSM proof of concept can directly measure Electrocardiogram (ECG), Galvanic Skin Response (GSR), and skin temperature. The MPBSM proof of concept can also indirectly measure heart rate, respiration rate, cadence, step count, and sweet-loss rate.
