The SN74CBT3126 quadruple FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is low., To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pullup resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver.
The SN74CBT3125 quadruple FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE)\ input is high., To ensure the high-impedance state during power up or power down, OE\ should be tied to V, through a pullup resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver.
Fet Mux/Demux, 4Bit, 1:2, Ssop-16, Logic Family/Base Number:74Cbtlv257, Logic Type:Fet Multiplexer/Demultiplexer, No. Of Channels:4Channels, Line Configuration:1:2, Supply Voltage Min:2.3V, Supply Voltage Max:3.6V, Logic Case Rohs Compliant: Yes |Texas Instruments SN74CBTLV3257DBQR
The SN74CB3T3253 is a high-speed TTL-compatible FET multiplexer/demultiplexer with low ON-state resistance (r, ), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks V, . The SN74CB3T3253 supports systems using 5-V TTL, 3.3-V LVTTL, and 2.5-V CMOS switching standards, as well as user-defined switching levels (see Figure 1)., The SN74CB3T3253 is organized as two 1-of-4 multiplexer/demultiplexers with separate output-enable (1OE\, 2OE\) inputs. The select (S0, S1) inputs control the data path of each multiplexer/demultiplexer. When OE\ is low, the associated multiplexer/demultiplexer is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the associated multiplexer/demultiplexer is OFF, and a high-impedance state exists between the A and B ports., This device is fully specified for partial-power-down applications using I, . The I, feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off., To ensure the high-impedance state during power up or power down, OE\ should be tied to V, through a pullup resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN74CBT3126 quadruple FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is low., To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pullup resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver.
The SN74CBT3125 quadruple FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE)\ input is high., To ensure the high-impedance state during power up or power down, OE\ should be tied to V, through a pullup resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver.
Fet Bus Switch Octal Low Volt, Smd, No. Of Channels:1Channels, Output Current:64Ma, Logic Type:Fet Bus Switch, Input Level:1.7V, No. Of Pins:20Pins, Logic Case Style:Tssop, Supply Voltage Min:2.3V, Supply Voltage Max:3.6V, Operating Rohs Compliant: Yes |Texas Instruments SN74CBTLV3245APW
Logic, Switch Bus Fet Hs, 20Soic, No. Of Inputs:8, Output Current:64Ma, Propagation Delay:250Μs, No. Of Pins:20Pins, Logic Case Style:Soic, Supply Voltage Min:2.3V, Supply Voltage Max:3.6V, Operating Temperature Min:-40°C, Operating Rohs Compliant: Yes |Texas Instruments SN74CB3T3245DW
Logic, Mux/Demux Fet Dual, 16Tssop, Logic Family/Base Number:74Cb3Q253, Logic Type:Fet Multiplexer/Demultiplexer, No. Of Channels:2Channels, Line Configuration:4:1, Supply Voltage Min:2.3V, Supply Voltage Max:3.6V, Logic Case Rohs Compliant: Yes |Texas Instruments SN74CB3Q3253PW